Cummings Custom Refinishing

Cummings Custom Refinishing operates out of Greeneville, Tennessee with a simple philosophy: quality and craftsmanship above everything else. They've been refinishing firearms for gun owners, dealers, and manufacturers across the country for over 25 years—and they do it all by hand.

Most refinishers open a can of DIY paint and spray. CCR doesn't. Here's what actually happens when you send them a gun:

• •Hand disassembly and inspection of every part
• •Hand prep work that includes removing dings, scratches, blemishes, and factory imperfections (this step alone can take hours)
• •Rust and pit removal done by hand—not media blasted over
• •Custom proprietary coatings developed specifically for firearms

"Each part of every firearm is inspected, disassembled and prepped by hand. We do not just media blast and spray over problems—we remove them the proper way."

This is the foundation for a finish that actually lasts.

Two years of research and nano-technology breakthroughs led to Cera-Hide. Here's the process:

10-step coating process: - All steel parts receive mil-spec hot parkerization first (extra rust/corrosion layer) - Alloy parts are pre-treated for adhesion and protection - Thermally cured ceramic-infused nano matrix coating applied - Self-lubricating finish with three forms of lubrication - 1,000+ hours military salt spray testing

Cera-Hide available in: - Matte Black - House Black (deep mid-luster sheen) - OD Green - Dark Earth - Dark Side Stainless - Tri-Tanium (semi-metallic earth tone) - Custom colors on request

Not your standard plating. CPII is an 18-step process for every single part:

The process: - Hand-prepped to eliminate tolerance issues - Electroless nickel/boron nitride composite - Boron nitride particles embedded in phosphate matrix - Fresh lubricating particles exposed as wear occurs

What CPII delivers: - Lowest coefficient of friction in the industry - Up to 10x more corrosion protection than nickel/Teflon or chrome - Longer firing periods between cleanings - Eco-friendly process - Bead-blasted stainless appearance

Designed specifically for anodized alloy frames. Self-lubricating with three forms of lubrication, without damaging factory anodization.

Mil-spec phosphate finish—the military standard for decades. Medium to dark gray color depending on steel. Pre-dip blackening available if desired.

Additional Services: - Rust and pit removal: starts at $50 - Chemical stripping of nickel plating: starts at $75 - Bobtail installation (labor): $150 - Ed Brown Bobtail: $250 - Memory Groove Safeties (install): $75 - Stainless bead blasting: starts at $149

Complete firearms: - Handguns: UPS or FedEx only - Shotguns/Rifles: USPS, UPS, or FedEx - CCR is an FFL—you can ship direct - Preferred FFL on ShipMyGun.com for discounted shipping

Slides and parts: - USPS flat-rate priority boxes (most affordable) - Do NOT ship handgun frames via USPS

Through your FFL: - Yes, they can ship to CCR - CCR ships back to your FFL - Provide a copy of your FFL's license

• •Average: 8-10 weeks
• •Specialty gunsmithing: Up to 12 weeks
• •Call (423) 639-8924 for specific timing

CCR warranties their finishes against corrosion and peeling—for life. Does NOT cover normal wear on contact areas, abuse, neglect, or damage from misuse. Warranty remedy is free refinishing with the same finish and color. Return shipping cost is on the customer.

Cummings Custom Refinishing 3351 Asheville Hwy Greeneville, TN 37743

• •Phone: (423) 639-8924
• •Email: [email protected]

Complete work order form required with all orders. Email or call to request a quote after inspection.